Units can be skid mounted, on a gooseneck trailer, or on a bumper pull trailer.
Swivel head:
100 Ton Static load capacity rated 98 tons @ 100rpm.
10K washpipe packing.
Includes an, 2.875" I.F. connection and 2" 1502 mud line connection, 2 3/8" PH6 wireline access hole.
Swivel head comes with tilt cylinder for making connections and float position for raising
This unit comes with standard elevator bale, Standard length torque arm, standard saver sub 2.875" I.F. box X 2.875" I.F. pin.
Prime mover:
It will be powered by a Cummins QSB 4.5 TIER IV 100+hp. diesel engine.
Hydraulic system:
Hydrostatic 5500 psi system, 6500ft-lbs torque, with two 1 inch , 100 foot long high pressure hoses, and a .75" 100 foot long drain hose.
Controls:
Wireless radio control including engine controls, swivel controls swivel head tilt control, and emergency shutdown.
Radio comes with 50 foot tether cord in case of battery failure.
Positive-air shutdown on radio.
Other features:
Single powered hose reel, 8,000lb Hydraulic winch, toolbox, a spark arrestor muffler, block heater, and snobs welded to the floor for torque arm and subs.
This unit can be skid mounted or on a tandem axle dual wheel gooseneck trailer.
Swivel head:
120 ton static load capacity, rated 60 tons @ 100rpm.
Includes an, 3.5" I.F. connection and 3" mud line connection.
This unit comes with standard elevator bale, Standard length torque arm, and standard saver sub 3.5'' I.F. box X 3.5'' I.F. pin.
Prime mover:
It will be powered by a Cummins QSB 6.7 TIER IV 230 hp. diesel engine.
Hydraulic system:
Hydrostatic 5000 psi system, 7000 ft-lbs. torque, with two 1.25" 100 foot long high pressure hoses, and a one inch 100 foot long drain hose.
Controls:
Air controlled units come with 50 foot air lines.
Rexroth directional valve, and throttle valve.
Remote-air kill.
Positive-air shutdown via manual pull-cable.
Radio controlled units come with 50 foot tether cord in case of battery failure.
Positive-air shutdown on radio.
Other features:
Single powered hose reel, 10,000 lb. hydraulic winch, toolbox, a spark arrestor muffler, and snobs welded to the floor for torque arm and subs.
Units can be skid mounted, on a gooseneck trailer, or on a bumper pull trailer.
Swivel head:
85 Ton Static load capacity rated 45 tons @ 100rpm.
Includes an, 2.875" I.F. connection and 2.5" mud line connection.
This unit comes with standard elevator bale, Standard length torque arm, standard saver sub 2.875" I.F. box X 2.875" I.F. pin.
Prime mover:
It will be powered by a Cummins QSB 4.5 TIER IV 100+hp. diesel engine.
Hydraulic system:
Hydrostatic 5000psi system, 3975 ft-lbs torque, with two 1" 100 foot long high pressure hoses, and a .75" 100 foot long drain hose.
Controls:
Air controlled units come with 50 foot air lines.
Rexroth directional valve and throttle valve.
Remote-air kill.
Positive-air shutdown via manual pull-cable.
Radio comes with 50 foot tether cord in case of battery failure.
Positive-air shutdown on radio.
Other features:
Single powered hose reel, 8,000lb Hydraulic winch, toolbox, a spark arrestor muffler, and snobs welded to the floor for torque arm and subs.
Units can be skid mounted, on a gooseneck trailer, or on a bumper pull trailer.
Swivel head:
45 Ton Static load capacity rated 22.5 tons @ 100rpm.
Includes an, 2.375" PAC connection and 1.5" mud line connection.
This unit comes with standard elevator bale, Standard length torque arm, standard saver sub 2.375" PAC box X 2.375" I.F. pin.
Prime mover:
It will be powered by a Cummins QSB 4.5 TIER IV 100+hp. diesel engine.
Hydraulic system:
Open loop 2500 psi system, 1810 ft-lbs. torque, with two 1" 50 foot long high pressure hoses.
Controls:
Manual 4-way valve, mounted on fender.
Positive-air shutdown via manual pull-cable.
Other features:
Single powered hose reel, 2,500lb electric winch, spark arrestor muffler, toolbox, and snobs welded to the floor for torque arm and subs.